Table of Contents
Advertisement
10
Description — FLIR Screen-EST
• Click Settings panel password to protect the Settings page with a password. This
opens a dialog box. Select the Protect settings panel with password check box and
enter the password.
10.3.6 Updates tab
Select how you want to manage updates of the FLIR Screen-EST.
When the Check if updates are available check box is selected, a check for updates will
automatically be performed every time the application is started.
When the Prompt to install updates check box is selected, you will be asked to install
any available updates. The Check if updates are available option must also be enabled.
If updates need to be downloaded via a proxy service, an additional configuration is
needed. In the Proxy settings dialog box, select the Use proxy check box, and then enter
the requested information. Click OK to save.
Note To check for and download updates, internet connection is required.
10.3.7 Theme tab
Change the theme of the user interface. FLIR Screen-EST will restart to apply the new
settings.
10.3.8 File explorer tab
Select if you want to show hidden files and display folder previews.
10.3.9 Editor tab
Change the file path to the folder where your custom palettes are located.
10.3.10 Regional settings tab
Select the language and units to be used in the user interface. FLIR Screen-EST will re-
start to apply the new settings.
10.4 Integration with external systems
There are two ways to integrate FLIR Screen-EST with an external system:
• Digital output.
• Webhooks.
10.4.1 Digital output
A basic level of integration is possible if the FLIR camera has a digital I/O connector.
1. Connect an external device such as a gate, lights, or a siren to the digital I/O connec-
tor of the camera.
2. Configure FLIR Screen-EST to trigger a digital pulse depending on the screening re-
sult; Normal temperature or Elevated temperature. For digital output settings, see
section 10.3.3 Output tab.
10.4.2 Webhooks
Webhooks is a method for HTTP communication between different systems. By using
webhooks, FLIR Screen-EST can be controlled by a third-party system. As an example,
you can include FLIR Screen-EST screening in your access control system.
General workflow for a third-party access control system with FLIR Screen-EST
screening:
1. The visitor starts the sign-in process through the access control system.
2. The access control system prompts the visitor to perform a screening and sends a
Start command to FLIR Screen-EST.
#T810570; r. AA/72255/72255; en-US
41
Advertisement
Table of Contents
