Environmental Specifications; Power Considerations; Power Requirements - Honeywell CN100 Planning And Installation Manual

Chapter 4 - CN100 Platform Installation

Environmental Specifications

Power Considerations

Table 4-1: Power Requirements
Model
Number
CC-
IION01
NAM
18
The operating conditions are as follows:
Storage temperature: -40°C to +85°C (–40°F to +185°F)
n
Operational Ambient temperature (T4): -40°C to +70°C (-40°F to
n
+158°F)
Relative humidity: 5% to 95% (non-condensing)
n
Vibration (sinusoidal): excitation: sine-shaped with sliding freq.
n
frequency range: 10 ~ 2000 Hz
o
loads: 10 ~ 150 HZ 1.0g
o
150 Hz ~ 2000 Hz: 0.5g
o
no. of axes: 3 (x, y, z)
o
traverse rate: 1 oct/min.
o
Shock: 4g max. / 25ms 6 direction
n

Power Requirements

Power is supplied to the controller and NAM through the power input
terminals on the controller IOTA. The relevant specifications at each
power input terminals are detailed in the following table.
Rated input Input voltage
voltage range
24 VDC 18 to 30 VDC
24 VDC 18 to 30 VDC
ATTENTION: To comply with CE certification, use shielded wire
to connect to the 24 VDC power source. Not to be connected to
DC distribution network only via CE Certified power supply.
Maximum ripple Maximum rated input
voltage current
120 mVpp
120 mVpp
0.13 A at 30 VDC
0.05 A at 30 VDC