Table of Contents
Advertisement
Pin #
NT Mode
5
Receive #1 (-)
6
Not connected
7
Not connected
8
Not connected
FXS and FXO Connections (RJ-11)
Warning:
The RJ-11 cable should comply with UL 1863 and CSA C22.2 No 233 standards.
Caution:
Use standard telecommunication cables with a minimum of 26 AWG wire gauge.
Note:
The Ringer Equivalence Number (REN) is 0.1. for each individual FXO port of the unit.
Note:
The maximum standard FXS cable length is 450 m.
The RJ-11 pair of wires is wired so that pins 3 and 4 are connected to the Ring and Tip, which meets
the EIA/TIA-IS 968 and CS-03 Issue 8, Part III requirements.
Pin #
1
2
3
4
5
6
GX Gateway Hardware Installation Guide
TE Mode
Transmit #1 (-)
Not connected
Not connected
Not connected
Function
Not used
Not used
Ring
Tip
Not used
Not used
25
Advertisement
Table of Contents
Troubleshooting
