Mitel Mediatrix Model M Hardware Installation Manual page 15

LEDs
# LED
1 Unit with Power 1 connector
only
2 Ready
3 In-Use
8 IN-USE
9 LINK
11 ERROR/TROUBLE
12 ETH1 - Right LED (activity)
12 ETH1 -Left LED (speed)
GX Gateway Hardware Installation Guide
Behavior
Green, blinking, 1 cycle per
second, 50% duty
Green, steady ON
OFF
Green, steady ON
OFF
Blinking 1 cycle per 4
seconds, 75% duty
OFF
Yellow, steady ON
Yellow, blinking yellow, 1
cycle per second, 50% duty
Amber, steady ON
OFF
Green, steady ON
OFF
Red, steady ON
OFF
Green, blinking, variable rate Network traffic
Green, steady ON
OFF
OFF
Green
Yellow
Condition
Unit is being restarted
Unit is restarted
No current or failing power
supply
All lines are enabled
(operational state)
All lines are disabled
(operational state)
At least one line is enabled
and at least one line is
disabled (operational state)
Lines idled and unlocked
Lines in use and unlocked
Locked
Indicates that the PRI port is
in use
Indicates that the PRI port is
not connected
Indicates that the PRI port is
well connected
Indicates that the PRI port is
not connected
Indicates that the PRI port is
not working properly
Indicates that the PRI port is
working properly
No network traffic
Not connected
10 Mbps
100 Mbps
1000 Mbps
15