Connecting The Display Device - Toshiba M2 User Manual

60
Connecting Other External Devices
Using external display devices

Connecting the display device

If you are connecting a television or other video display
device to the computer's S-video port, first refer to the next
two subsections.
If you are connecting an SVGA monitor, skip to
an external monitor or projector" on page
Selecting video cables
To connect a device to the S-video port, you'll need to
purchase an S-video cable. For the best video quality, always
use a properly shielded cable.
Using a poor quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting to the S-video port
NOTE
1 Connect one end of the S-video cable to the external
video device.
Refer to the documentation provided with the device for the
location of its S-video-in port.
2 Connect the other end of the S-video cable to the S-video
port on the back side of the computer.
3 Turn on the external video device.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Video cables are not included with your computer. To connect
a device to the S-video port, you'll need to purchase an S-
video cable.
"Connecting
61.