Closing The Display Panel - Toshiba M2 User Manual

58
Getting Started
Turning off the computer
❖
Use the Shut down command if you are using the
Windows
connected to a domain server.
❖
If you have work in progress and are not connected to a
network, use the Windows
commands to save your system settings to memory so
that, when you turn on the computer again, you will
automatically return to where you left off.
❖
To leave the computer off for a longer period, you can use
the Windows
a domain server or the Shut down when connected to a
domain server instead.

Closing the display panel

When you are finished, shut the computer down and close the
display panel to keep dust and dirt out of the computer.
If you close the computer while it is still on, these actions will
occur:
❖
If you have the LCD power-saver feature set, the LCD
panel will automatically turn off until you open it again.
❖
If you have the audible warning set, the computer will
beep to notify you that it is still on.
❖
If you have an action feature set, the computer will
perform either: Nothing, Standby, or Hibernate (see
"Using Hibernation" on page
®
XP Professional operating system and
®
Turn Off command when not connected to
Never turn off the computer while any drive is in use. Doing so
may damage the media in use and result in loss of data. For
more information, see
page 99.
®
Standby or Hibernate
"Powering down the computer" on
122).