Deleting Or Changing A Hard Disk Drive User Only Password In System Setup - Toshiba M2 User Manual

194
Keeping Your Files Safe
Hard disk drive passwords
7 When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
message appears. Repeat
password again.
8 Press
9 When System Setup prompts you to confirm your
change, press
Deleting or changing a hard disk drive user only password in
System Setup
To delete or change a user only password in System Setup:
1 Click Start, then click Shutdown, and click OK.
The computer shuts down.
2 Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3 Press
screen.
4 Press the spacebar, then type in your user password and
press
5 If you want to change the password, input the new
password. If you want to delete the password, proceed to
step
6 When System Setup prompts you to verify the password,
type it again and press
. If the two passwords do not match, an error
to save the change.
End
.
Y
Esc
to move to the HDD PASSWORD section on the
H
.
Enter
7.
.
Enter
step 6 and
key and press and hold the power
.
Enter
step 7 to enter the
.
F1