Deleting The Hard Disk Drive Master And User Passwords In The System Setup - Toshiba M2 User Manual

M2 user's guide
Hide thumbs Also See for M2:
Table of Contents

Advertisement

5
Press the spacebar, then enter the appropriate password
and press
6
If you want to change your password, input the new
password.
7
When System Setup prompts you to verify the password,
type it again and press
If the two passwords match, System Setup displays:
Registered
password if a master password is registered.
8
Press
9
When System Setup prompts you to confirm your
change, press
Deleting the hard disk drive master and user passwords in
the System Setup
To delete the master and user passwords in System Setup:
1
Click Start, then click Shutdown, and click OK.
The computer shuts down.
2
Hold down the
button until the on/off light on the system indicator panel
illuminates (green) for approximately one second. When
the following message appears on the screen: "Check
system, Then press [F1] key," press
The System Setup screen appears.
3
Press
screen.
4
Select the Master Password using the down arrow key.
.
Enter
. Note that you can only change (not delete) the user
to save the change.
End
.
Y
HINT: You must delete the hard disk drive master password
before you can delete the hard disk drive user password.
Esc
to move to the HDD PASSWORD section on the
H
Keeping Your Files Safe
Hard disk drive passwords
.
Enter
key and press and hold the power
197
.
F1

Advertisement

Table of Contents
loading

Table of Contents