Table of Contents
Advertisement
Connecting an HDMI™-compatible television or
display device
To connect an HDMI™-compatible television or display
device:
❖
Connect one end of the cable (not included with your
device) to the Micro HDMI™ Out port on the back of the
keyboard dock, and then connect the other end of the
cable to your television or display device. Refer to the
manual that came with the television or display device
for more information.
Your device should automatically detect the external
display device.
NOTE
Directing the display output when your device is
attached to the keyboard dock
Once you have connected an external display device, you
can choose to use the internal display only, the external
device only, or both simultaneously.
NOTE
The quickest way to change the display output settings is to
use the (
Press the (
takes effect. Briefly pause each time you press the (
keys to allow time for the display to change.
This cycles through the settings in the following order (the
last two options are available if an external monitor is
connected):
❖
PC screen only
❖
Duplicate
Using external display devices
You can change the display settings by pressing the
( ) +
keys, or by configuring the display properties
P
settings.
Some modes are only available with the appropriate
device attached and turned on.
) +
keys:
P
) +
keys repeatedly until the setting you want
P
Getting Started
51
) +
P
Advertisement
Table of Contents
