Control Buttons; Disabling Or Enabling The Dual Pointing Device - Toshiba M2 User Manual

Control buttons

When a step instructs you to click or choose an item, move
the cursor to the item, then press and release the primary
(left-hand) button. To double-click, press the primary button
twice in rapid succession. The primary button usually
corresponds to the left mouse button.
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button. Check your program's documentation to find
whether it uses the right mouse button.

Disabling or enabling the Dual Pointing Device

The Dual Pointing Device, consisting of the AccuPoint II and
TouchPad, is enabled by default. To change the enable/
disable Dual Point setting:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Printers and Other Hardware.
3 Click Mouse Properties.
The Mouse Properties window appears.
4 Click the Dual Pointing Device tab.
The Dual Pointing Device tab view window appears.
5 Select Disable or Enable, whichever is appropriate.
6 Click Apply.
7 Click OK.
The Mouse Properties window closes.
8 Close the Printers and Other Hardware window.
9 Close the Control Panel window.
Learning the Basics
Using the TouchPad™
99