9
Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Removing a compact disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
1
Press the Eject button on the drive.
2
Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3
Gently push the tray in to close it.
Removing a compact disc with the computer turned off
To remove a compact disc (CD or DVD) with the computer
turned off:
1
Insert a slender object, such as a straightened paper clip,
into the manual eject hole.
Using the DVD-ROM or multi-function drive
Do not press the Eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
If the disc is still spinning when you open the disc tray, wait for
it to stop spinning before you remove it.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Learning the Basics
113