Closing The Display Panel; Customizing Your Computer's Settings; Caring For Your Computer; Cleaning The Computer - Toshiba Tecra A9 Series User Manual

78
Getting Started

Customizing your computer's settings

5 Click Apply.
6 Click OK.
Once the computer is configured, you can place it into Standby
mode by either pressing the power button or closing the display
panel, depending on the Standby options set.
Starting again from Standby mode
To start up the computer from Standby mode, press the power
button until the on/off light glows green. The computer returns to
the screen(s) you were using.
If you place the computer in Standby mode by closing the display
panel, you can start it again by opening the display panel.

Closing the display panel

After you have turned off the computer, close the display panel to
keep dust and dirt out of the computer.
Customizing your computer's settings
There are several ways in which you can customize your computer
to suit your particular requirements. Refer to your operating system
documentation or Help and Support for details.
You may also wish to customize your power usage settings. For
more information, see
additional custom settings you can choose. See
page 134.

Caring for your computer

This section gives tips on cleaning and moving your computer. For
information about taking care of your computer's battery, see
"Taking care of your battery" on page

Cleaning the computer

To keep your computer clean, gently wipe the display panel and
exterior case with a lightly dampened cloth.
Downloaded from LpManual.com Manuals
"Power Profiles" on page
Keep liquids, including cleaning fluid, out of the computer's
keyboard, speaker, and other openings. Never spray cleaner directly
onto the computer and/or display. Never use harsh or caustic
chemical products to clean the computer.
107. There are
"Utilities" on
112.