Before You Begin; Installing Tram - 3Com SuperStack II REMOTE ACCESS SYSTEM 1500 Getting Started Manual

3-2 C 3: U
HAPTER SING

Before You Begin

Installing TRAM

TRAM C RAS 1500
TO ONFIGURE THE
Before you begin, obtain the following information from your network
administrator and record the information in the space provided below.
Ask your network administrator for
Network name
IP address to assign to the RAS 1500
IP network mask
Community string (SNMP password)
Default Gateway address
Default gateway metric
DNS Server address
DNS server domain name
IP addresses to assign incoming calls
Range of IP addresses to assign incoming calls
MAC address (from the sticker on the back of the RAS 1500)
User names and passwords
See Appendix A, Configuration Assistance, for a more detailed
configuration worksheet.
To install TRAM:
1 Insert the Transcend
On most systems, TRAM 1500 launches itself and prompts you through
the installation. If not, follow these steps:
2 At the Windows 95 or NT desktop, click Start, then click Run.
3 In the Run dialog box, type:
4 Click OK.
5 Follow the instructions on the screen.
® Remote Access Manager CD into the CD drive.
<your CD drive letter>:\setup
Your value
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___
___.___.___.___