Security Options; Configuration Options; Universal Connect; Isdn Configuration - 3Com SuperStack II REMOTE ACCESS SYSTEM 1500 Getting Started Manual

Hide thumbs Also See for SuperStack II REMOTE ACCESS SYSTEM 1500:
Table of Contents

Advertisement

Security Options

Configuration
Options

Universal Connect

ISDN Configuration

RAS 1500 supports the following security options:
IP packet filtering in both the inbound and the outbound directions of
ports, users, and dial-out locations.
RADIUS
NOS-based authentication (Windows NT 4.0, Novell NetWare)
Dial-back, fixed and roaming
PAP and CHAP
Local password authentication
The RAS 1500 supports the following configuration options:
TRAM
Command Line Interface (CLI)
TRAM
TRAM allows you to configure your RAS 1500 using a GUI interface, if
you are using Windows 95 or Windows NT 4.0.
Command Line Interface
The RAS 1500's CLI includes an assortment of utilities for troubleshooting
connections including:
The ability to manually dial a location to test connectivity
The ability to use telnet, Rlogin or ClearTCP to establish a session with
another host.
UNIX-like troubleshooting commands including ping to debug IP
connections.
Universal Connect allows ISDN I/O module users to access information at
analog speeds up to 56 Kbps and at digital speeds up to 128 Kbps from
the same equipment and port.
The RAS 1500 supports Basic Rate Interface (BRI) ISDN with either the
U-Interface (for North America) or the S/T-Interface (for other countries).
Contact your ISDN provider for information about ISDN in your area or
call 1-800-877-ISDN (USA only).
Overview
1-5

Advertisement

Table of Contents
loading

Table of Contents