Toro Z Master 8000 Series Operator's Manual page 48

Figure 58
1. Parking brake
2. Steering lever
3. Speed-control lever
8. Adjust the linkage length with the 2 nuts at the
bottom of the vertical spring assembly
59).
Note:
The linkage should measure 22.7 to 23.3
cm (8.92 to 9.16 inches).
g020489
4. Vertical spring assembly
5. Nut
6. 6 to 7 cm (2.35 to 2.85
inches)
(Figure
1. 22.7 to 23.3 cm (8.92 to
9.16 inches)
9. Engage and disengage the brakes to check for
proper engagement and disengagement. Adjust
if necessary.
Note:
When the brakes are disengaged, there
should be little to no free play in the brake
linkage with no dragging in the brakes.
48
Figure 59
2. Nuts
g020525