Reducing The Tire Pressure; Burnishing The Brakes; Product Overview; Controls - Toro Greensmaster TriFlex 3400 Operator's Manual

12

Reducing the Tire Pressure

No Parts Required
Procedure
The tires are overinflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before starting the machine; refer to
Pressure (page 38).
13

Burnishing the Brakes

No Parts Required
Procedure
Burnish the brakes; refer to
(page 41).
Checking the Tire
Burnishing the Brakes

Product Overview

1. Engine
2. Roll bar
3. Control panel
4. Seat

Controls

Traction Pedal
The traction pedal (Figure
to make the machine move forward, to move it
backward, and to stop the machine. Press the top
of the pedal to move forward and the bottom of the
pedal to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For your comfort,
do not rest the heal of your foot on the reverse pad of
the traction pedal when you are driving the machine
forward. (Figure 15).
16
Figure 13
5. Steering wheel
6. Traction pedal
7. Footrest
8. Cutting units
14) has 3 functions:
g014674