7
Reducing the Tire Pressure
No Parts Required
Procedure
The tires are over-inflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before starting the machine. Refer to
Tire Pressure (page
34).
Product Overview
Checking the
1. Engine
2. Roll bar
3. Control panel
4. Seat
Controls
Traction Pedal
The traction pedal
to make the machine move forward, to move it
backward, and to stop the machine. Press the top
of the pedal to move forward and the bottom of the
pedal to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move to the
N
EUTRAL
Note:
pad of the traction pedal when you are driving the
machine forward.
14
Figure 12
5. Steering wheel
6. Traction pedal
7. Footrest
8. Cutting units
(Figure
13) has 3 functions:
position to stop the machine
Do not rest the heal of your foot on the reverse
g014674
(Figure
14).