Toro Greensmaster TriFlex 3400 Operator's Manual page 6

Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine. If possible,
keep the cutting units lowered to the ground while operating the
machine on slopes. Raising the cutting units while operating on
slopes can cause the machine to become unstable.
1. Warning—read the
Operator's Manual;
receive training before
operating the machine.
2. Warning—hearing
protection must be worn.
3. Cutting/dismemberment
hazard of hands or
feet—keep all guards
and shields in place.
136-8505
4. Tipping hazard—do not
use on slopes greater than
15°.
5. Thrown object
hazard—keep bystanders
out of the operating area.
6. Warning—engage the
parking brake, shut off the
engine, and remove the
ignition key before leaving
the machine.
decal136-8505
1. Warning—read the
Operator's Manual; do
not operate this machine
unless you are trained.
2. Warning—wear hearing
protection.
3. Cutting/dismemberment
hazard of hand or
foot—stay away from
moving parts; keep all
guards and shields in
place.
6
136-8506
4. Tipping hazard—slow the
machine before turning;
do not turn at high speeds.
5. Thrown object
hazard—keep bystanders
away.
6. Warning—engage the
parking brake, shut off
the engine, and remove
the key before leaving the
machine.
139-2728
decal136-8506
decal139-2728