Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro Workman GTX Series Operator's Manual

Maintenance

Maintenance Safety

•
Do not allow untrained personnel to service the
machine.
•
Before you leave the operating position, do the
following:
– Park the machine on a level surface.
– Shift the transmission to the N
– Engage the parking brake.
– Lower the cargo bed.
– Shut off the machine and remove the key.
– Wait for all movement to stop
•
Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Support the machine with jack stands whenever
you work under the machine.
•
Do not work under a raised bed without the proper
bed safety support in place.
•
Do not charge the batteries while servicing the
machine.
•
To ensure that the entire machine is in good
condition, keep all hardware properly tightened.
•
To reduce the potential fire hazard, keep the
machine area free of excessive grease, grass,
leaves, and accumulation of dirt.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 100 hours
Before each use or daily
Every 25 hours
Every 100 hours
Every 300 hours
position.
EUTRAL
Maintenance Procedure
• Perform the breaking in a new machine guidelines.
• Inspect the seat belt(s) for wear, cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly.
• Check the tire pressure.
• Charge the batteries.
• Check the water level of the batteries.
• Check the brake-fluid level.
• Wash the machine.
• Clean the batteries.
• Check the water level of the batteries and add distilled or deionized water to the
batteries (if necessary).
• Grease the bearings and bushings.
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Inspect the steering and suspension for loose or damaged components.
• Check the front wheel camber and toe-in.
• Check the transaxle-fluid level.
• Check the transaxle for leaks.
• Inspect the brakes.
• Grease the front wheel bearings.
•
If possible, do not perform maintenance while the
machine is running. Keep away from moving parts.
•
If you must run the machine to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from
any moving parts. Keep bystanders away from
the machine.
•
Check the parking brake operation as
recommended in the maintenance schedule and
adjust and service it as required.
•
Keep all parts of the machine in good working
condition and all the hardware properly tightened.
Replace all worn or damaged decals.
•
Never interfere with the intended function of a
safety device or reduce the protection provided
by a safety device.
•
If major repairs are ever necessary or assistance
is required, contact an Authorized Service Dealer.
•
Altering this machine in any manner may affect the
operation of the machine, performance, durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro®
Company.
24