Table of Contents
Advertisement
6. Connect the end of the LC-LC Fibre Channel cable to one of the following
devices:
v SFP module that is installed in an IBM Fibre Channel switch
v Optical interface connector on an IBM FAStT FC-2 Host Bus Adapter (Part
Number 19K1246)
v LC-SC Fibre Channel cable adapter (For information about using an LC-SC
cable adapter, see "Using LC-SC Fibre Channel cable adapters" on page 8.)
For more information about connecting to these devices, see the documentation
that comes with the device.
7
Chapter 1. Introduction
Advertisement
Table of Contents
