Cambo CS-BRONTO Instruction Manual

Please read this manual carefully before using the Cambo CS rig!
The Cambo CS system complies with the "Arriflex
system is compatible with parts of other brands using the 15mm light weight standard. The 15mm light
weight standard characteristics are: 15mm iris rods that are positioned 60mm apart and 85mm below
the optical axis.
The Bronto-rig offers stability during handheld video capturing from low-angle. This Bronto rig can be
extended to any rig configuration.
The rig includes a 1/4 Ballhead for Monitor attachment to the front of the handle.
The Bronto-rig can be used with any follow-focus and/or matte box, this rig configuration allows to
center the weight of the camera by the position of the handle for optimised alignment of the shooting
direction.
A Bundle with Cambo Mattebox and Follow Focus is also available.
The distance between the optical centre of the lens and the iris rods is adjustable, making this rig
applicable to different types of cameras.

Warnings


Before loosening a clamp knob, ensure that the loosened part of the rig is
supported.

Do not tighten the clamp without a rod inserted. This can deform and damage
the clamp.

Always check, after (re)assembly of the rig, if the clamps connecting the rods
or handles are well tightened.
INSTRUCTION MANUAL
Thank you for purchasing a Cambo product

CS-BRONTO
HDSLR/DV SUPPORT SYSTEMS
®
15mm Light Weight" standard. This means the CS

EN