Troubleshooting - Electrolux Explore 7 Series Instruction Book

TROUBLESHOOTING

EN
SYMPTOM
CNS
The blender does not switch on.
CNT
KR
ID
TH
VN
The motor stalls during operation
If the appliance is still not working, please contact Electrolux Customer Service.
10
CAUSE
Jug/base are not fixed properly.
The ON/OFF-button is not pressed.
The motor has overheated. The
display is blinking.
The plug is not properly connected
to the power outlet.
Power outage.
Functional problem.
Ingredients are too large.
Wrong ingredients.
SOLUTION
Check if all the
components are in correct
position. Note! the jug can
only be placed on the
base with handle towards
the user interface.
Press the ON/OFF button
to switch on the blender.
The control panel will
illuminate when the
blender is switched on.
Wait until the product has
cooled down and all the
buttons are lit.
Check the connection of
the plug to the outlet or try
another outlet.
Wait until power outage
is over.
Contact authorized
service.
If the motor stalls,
switch off the blender
immediately, unplug the
appliance and let it cool
for at least 10 minutes.
Cut all firm fruits and
vegetables into pieces
no larger than 1.8 cm² to
2.5 cm².
The appliance intended
use is production of
beverages. Add fruits,
vegetables or similar.
Never mix ingredients
such as dough, mashed
potatoes, meat or similar
in the mini jug.
www.electrolux.com