Troubleshooting - Electrolux E6TB1-50CW Manual

TROUBLESHOOTING

SYMPTOM
The blender does not
switch on
The motor stalls during
operation
www.electrolux.com
CAUSE
Jug/base are not fixed properly.
The motor has overheated.
The plug is not properly connected
to the power outlet.
Power outage.
Functional problem.
Ingredients are too large.
Wrong ingredients
SOLUTION
Check if all the components are in cor-
rect posi-tion. Note! the jug can only be
placed on the base with handle towards
the user interface.
Wait until the product has cooled down.
Check the connection of the plug to the
outlet.
Wait until power outage is over.
Contact authorized service.
If the motor stalls, turn the blender off
imme-diately, unplug the appliance and
let it cool for at least 20 minutes.
Cut all firm fruits and vegetables into
pieces no larger than 1.8 cm
The appliance intended use is
production of beverages. Add fruits,
vegetables or similar. Never mix
ingredients such as dough, mashed
potatoes, meat or similar.
If the problem persists, please contact
Elec-trolux Customer Care.
EN
CNS
CNT
KR
ID
TH
VN
to 2.5 cm .
2 2
9