Cleaning And Care - Electrolux Explore 7 Series Instruction Book

8 You have preset speeds (1, 2), dedicated recipe programs, and Pulse mode to choose from. The
selected speed or recipe program will light up. The blender will operate until the program is finished.
To stop any program manually, press any button.
9 You can give the ingredients a quick mix to get to your desired consistency with the Pulse
function. Press the PULSE button(S) to go into Pulse mode. The PULSE and the speed buttons start
blinking. Press 1 or 2 to pulse at different speeds.
10 The product comes with a variety of recipe programs. You can choose between Ice crush (O) and
Smoothies (P). The blender will stop automatically when the program is ready.
USING THE MULTI-CHOPPER*
11 Turn the multi-chopper (J) upside down, with the open end facing upwards. Carefully remove the
base for blade assembly (N) by rotating it clockwise, then remove the blade assembly (M). Fill the
multi-chopper jar with the desired ingredients. Do not fill more than half full. Place the multi-chopper
blade assembly (I), followed by the multi-chopper blade assembly base on the open end of the jar
and rotate clockwise to fasten the jar.
Turn the multi-chopper the right way up and lock into place on the blender base by rotating clock-
wise.
Caution! Always place the sealing ring around the blender blade assembly before operating the
product. Use only sealing rings provided by Electrolux!
Note: When locked, the symbol
with the symbol
Caution! The blades are very sharp!
USING THE TAKE AWAY BOTTLE*
12 Fill the ingredients in the take away bottle (I). Place the blender blade assembly (E) on the open
end of the jar and tighten the blender blade assembly base (F) by screwing it on the jar. Turn the
take away bottle upside down. Place the assembled take away bottle onto the blender base (A)
and rotate it clockwise to lock until it clicks into position.
Note: When locked, the symbol
symbol on the blender base.
Caution! The blades are very sharp!
USING THE COOLING STICK*
13 The cooling stick keeps your smoothies cool for longer. Unscrew the cap of the cooling stick (K)
and fill it with tap water. Screw the cap back on the cooling stick and place it in the freezer until the
water freezes.
14 Place the frozen cooling stick in the take away bottle. Pour your freshly prepared blend into the
take away bottle (I) and fasten with the drinking lid with carry handle (J). The cooling stick can be
cleaned in a dishwasher.

CLEANING AND CARE

To avoid crazing of the jug, always rinse the jug with only clean water right after usage. This is to
prevent acids or essential oils from the ingredients that may attack the plastic material. After rinsing
the jug, it can be washed by hand with detergent, or placed into the dishwasher for cleaning.
Avoid leaving the ready dishes (e.g. soup, smoothie, juice) in the jug for a long time, especially when
acidic ingredients (e.g. lime, lemon) is processed.
However, if crazing would appear, the effect is purely cosmetic and it does not have any impact the
integrity of the jug.
15
Always rinse the jug thoroughly with only clean water before placing it to the dishwasher.
Quick cleaning: Pour warm water into the jug, add a few drops of detergent.
Mix water and detergent by pressing the PULSE button then speed 2 button a couple of times.
Finally, rinse the jug under running water.
www.electrolux.com
(* CERTAIN MODELS ONLY)
on the multi-chopper blade assembly base should be aligned
on the blender base.
(* CERTAIN MODELS ONLY)
on blender blade assembly base should be aligned with the
(* CERTAIN MODELS ONLY)
EN
CNS
CNT
KR
ID
TH
VN
7