Scale Entries - Sharp UP-820N Instruction Manual

■ Scale entries

You have a choice of either the manual or automatic method for scale entry.
If the first method is chosen, the clerk needs to enter the reading of the scale manually. If the second one is
chosen, the weight is automatically read from the connected scale (option) and appears in the POS terminal
display. If you need manual scale entries, contact your authorized SHARP dealer.
Auto scale entries
Procedure
FF method
o
Tare weight
When you use a
programmed scale
table number.
Scale table number
Normal method
o
Tare weight
When you use a
programmed scale
table number.
Scale table number
o
A B
thru
When you use a
programmed scale table no.
Scale table number
• Tare weight:
• Scale table number: 1 to 9
• The POS terminal can be programmed with up to nine scale tables and allows different tares to
NOTE
be assigned to them.
• When the
(option) and appears in the POS terminal display.
• When the PLU is programmed for "Compulsory scale entry," it is not necessary to press the
key.
• To issue a receipt which shows only a tare weight, press
S
c
and
• The currency descriptor is displayed/printed when it is programmed for the CHECK.
S
S
Tare weight
S
Up to 4 digits (integer + decimal)
S
key is pressed, the net weight is automatically read from the connected scale
.
Direct PLU
When you use a programmed
unit price
Unit price Department key
`
Unit price
u
PLU code
Direct PLU
Unit price
`
Unit price
Unit price Item selection
o
à
Dept.code
u
PLU code
, enter a tare weight, then press
S
41