Clerk Keys - Sharp UP-820N Instruction Manual

Clerk Keys

This POS terminal allows the operator to use the following four clerk identification systems:
• Contactless clerk keys (max. 126 clerks)
• Clerk code entry (max. 255 clerks)
• Clerk entry keys (max. 10 clerks)
• WMF clerk keys (max. 127 clerks)*
* The WMF clerk key is not a SHARP product.
The standard POS terminal comes with the clerk code entry system by default. If you want to change the clerk
identification system, contact your authorized SHARP dealer.
With regard to the contactless clerk key system, it is not available by default. The contactless clerk switch and
the contactless clerk key are optional.
Contactless clerk keys (optional)
Put one of the contactless clerk keys to the clerk switch.
Clerk code entry (1 through 9999)
The clerk code entry key is assigned to the
NOTE
˚
XXXX
Clerk code
Clerk entry keys
Q R
These keys identify clerks. Press any one of these keys.
WMF clerk keys
Put one of the WMF clerk keys in the WMF clerk switch.
j
key on the standard keyboard by default.
17