Prior To Entries; Preparations For Entries; Receipt And Journal Paper Rolls; Receipt On/Off Function - Sharp UP-820N Instruction Manual

4

Prior to Entries

Preparations for Entries

■ Receipt and journal paper rolls

If the receipt and journal paper rolls are not set in the machine or they are getting low, install new ones
according to section "Installing and Removing the Paper Roll" under "Operator Maintenance."

■ Receipt ON/OFF function

You can disable receipt printing in the REG mode to save paper using the receipt function. To disable
receipt printing, press the
indicator "R" is highlighted.
Your register will print reports regardless of the receipt state. This means that the receipt roll
NOTE
must be installed even when the receipt state is "OFF".

■ Clerk assignment

Prior to any item entries, a clerk must enter his/her clerk codes into the POS terminal. On your POS
terminal, you have four systems to enter your clerk code. You can use any of the following systems to
assign your clerk code.
Contactless clerk key system (option)
This system allows clerks to be assinged by setting corresponding contactless clerk keys. Any registration
cannot be performed unless a contactless clerk key is set.
Clerk code entry system (factory default)
The clerk code entry key is assigned to the
NOTE
If you select this system, clerks can be assigned by entering his or her clerk code in advance.
To sign on:
To sign off:
˚
Clerk entry key system (factory default)
If you select this system, clerks can be assigned by pressing corresponding clerk keys on the keyboard.
To sign on:
To sign off:
˚
‰
key to select "OFF". When the function is in the OFF status, the receipt off
˚
Clerk code
Q R
through Secret code
j
key on the standard keyboard by default.
(In case secret code is 0000)
e
Secret code
(In case secret code is 0000)
e
29