dji Phantom 3 Professional Quick Start Manual

Hide thumbs Also See for Phantom 3 Professional:

Download this manual

Read the User Manual and watch the video tutorials in the DJI Pilot app or on the official DJI website (www.dji.com), and

read the following documents included in the box before using your Phantom 3 Professional for the first time:

Search 'DJI Pilot' on the App Store or Google Play and

download the DJI Pilot app to your mobile device.

Pressing the Power Button once on either your Intelligent Flight Battery or Remote Controller displays the battery level.

Only use the official DJI Phantom 3 Professional charger. Remove the Intelligent Flight Battery from the aircraft before

charging.

It is recommended that you turn off the Intelligent Flight Battery or Remote Controller before charging.

Connect the charger to a suitable power source (100-240V 50/60Hz).

Connect the charger to the Intelligent Flight Battery or Remote Controller. The LEDs will display the current charge level,

and when fully charged, they will automatically turn off.

Remove the Intelligent

Flight Battery

Watch the tutorial videos on

the DJI Pilot app.

or in

Need help?

Do you have a question about the Phantom 3 Professional and is the answer not in the manual?

Page 1 Read the User Manual and watch the video tutorials in the DJI Pilot app or on the official DJI website (www.dji.com), and read the following documents included in the box before using your Phantom 3 Professional for the first time: Search ‘DJI Pilot’...
Page 2 Tilt the Mobile Device Holder to the desired position, and then adjust the antennas as shown. The strength of the Remote Controller’s signal will fluctuate depending on the positions of the antennas. The transmission signal between the aircraft and Remote Controller will be strongest within the range illustrated here.
Page 3 Before taking off, make sure the Aircraft Status Bar in the DJI Pilot app indicates ‘Safe to Fly (GPS)’ or ‘Safe to fly (non-GPS)’ if flying indoors. Your Phantom 3 Professional can automatically takeoff and land at the tap of a button in the Camera screen of the DJI Pilot app.
Page 4 1. Press and hold the Return to Home Button on your 2. The DJI Pilot app will warn you if your Phantom 3 Remote Controller until the LED surrounding the button Professional’s battery level falls under a certain level. This starts blinking white and starts beeping.