Texas Instruments EVMK2E Quick Start Manual

Evaluation module

Instructions to Boot Up Application Launcher

Getting Started

Trademarks

All trademarks are the property of their respective owners.

SPRUIN6 – May 2019

Submit Documentation Feedback

...............................................................................................................

EVMK2E Evaluation Module

Contents

............................................................................

Quick Start Guide

SPRUIN6 – May 2019

EVMK2E Evaluation Module

Table of Contents

Need help?

Do you have a question about the EVMK2E and is the answer not in the manual?

Page 1 EVMK2E Evaluation Module Contents ................Instructions to Boot Up Application Launcher ....................... Getting Started Trademarks All trademarks are the property of their respective owners. SPRUIN6 – May 2019 EVMK2E Evaluation Module Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
Page 2 2. Connect the Ethernet cable to the lower RJ45 jack of J9. There should be PC attached on the same network running DHCP server. 3. Insert DC-in cable to apply 12 V power. 4. Get the IP address from the LCD. EVMK2E Evaluation Module SPRUIN6 – May 2019 Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
Page 3 Hardware & Software details • User's Guide • Technical Reference Manual EVMK2E EVM Support For technical queries related to this EVM, write to tievmsupport@einfochips.com. SPRUIN6 – May 2019 EVMK2E Evaluation Module Submit Documentation Feedback Copyright © 2019, Texas Instruments Incorporated...
Page 4 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...

Evmk2ex