Table of Contents
Advertisement
Metal tube flowmeter
1. Terms and Conditions
1.1
Intended use
Metal tube flowmeter in mind, also known as variable area flowmeter (hereinafter referred
to as meter).The variable area flowmeter are suitable for measuring gases, vapours and
liquids.Meter can be used to measure the continuous cleaning of gases and liquids, especially
for flow measurement and control of low flow, low flow rate, harsh media conditions. Not
used to measure solid particles and highly viscous media. If the media conditions are quite
poor, when ordering the instrument, please contact me to confirm the instrument meets its
requirements. The devices are particularly suitable for the measurement of:Water、
Hydrocarbons、 Corrosion protection agents and lubricants、 Chemicals and additives、 Solvents、
Superheated steam、Air、Industrial gases and so on.
Meter is limited to medium conditions specified under meter data (temperature, pressure,
media and the environment etc.).
WARNING!
The operator himself bears the sole responsibility for the intended use of the device
regardingthe suitability and the corrosion resistance of the used materials against the
measured fluid.The manufacturer is not liable for any damage resulting from improper use
or use for other thanthe intended purpose.
1.2
Safety instructions
Using this product, please read the instructions carefully to avoid improper use, causing
injuries to the user, damage equipment, cause
Accidents. Meter used in hazardous areas, must carefully review whether the nameplate before
commissioning explosion-proof requirements, proof mark, should be properly installed in
accordance with the requirements of explosion protection, Using instruments, to avoid
security risks, ensure safety in production.
1
Advertisement
Table of Contents
