HT5 series metal tube flowmeter
Kx---
Means the correction factor
B. Water and air Flow rate B. Flow rate given in the table refers to 20 ℃, normal traffic
0.1013MPa state, which allows the range of + 10% of normal flow, ie, after the calculated
water and air flow rate Qs, if the flow rate within a range shown in the table, it can
float the corresponding number range and the corresponding measuring tube Caliber is
selected.
C.
According to the following formula to determine user Flow rate measured medium scale
Q:
limits
Q
i
0
9 .
Kx
In the formula:
Qi refers to the volume flow in the flow meter float number corresponds to a water or
air limits in the calculation does not take into viscosity correction is possible with
computer calculations of a difference, then ask the user to assist.
Q
i
Q
1
1 .
Kx
35