Initial Start-Up - Webasto ThermoConnect TCon2 Operating And Installation Instructions

The QR-code label is needed to couple the
EN
ThermoConnect mobile app with the Ther-
moConnect TCon2 device.
4
Fig. 10
3
u Attach one label to a place where it can
be scanned using the phone camera.
For example to the vehicle A- or B-pil-
lar, the side of the dashboard or on the
fuse compartment lid.
u Attach the other label on the back of
2
the document.
13

Initial start-up

13.1 Install the app on mobile
phone
Apple App Store and Google Play have the
app available.
u
Check that the mobile phone is connec-
ted to the internet.
u
Go to the relevant app store and search
for "ThermoConnect". This step can
also be performed by using the QR
code.
– Apple App Store see Fig. 11
8
– Google Play see Fig. 12
1
Fig. 11
WHE000021A
2
Fig. 12
u Install the ThermoConnect mobile app
on the phone.
u Connect the phone with the Thermo-
Connect TCon2 following the instruc-
tions on the mobile phone app. See
chapter 13.2 "Connect the mobile
2
phone" on page 8.
13.2 Connect the mobile phone
Make sure that you have the Thermo-
Connect mobile app installed.
Step 1 of 4
Fig. 13
u
Launch the mobile app by clicking the
WHE000023A
Webasto icon.
Step 2 of 4
WHE000024A
4
Fig. 14
3
u Scan the QR code using the phone
camera. The QR code should be affixed
to the vehicle and to the backpage of
this manual. The QR code can also be
find on the receiver. (See chapter 12
"QR-code labels" on page 7).
2
Step 3 of 4
4
Fig. 15
3
WHE000025A
1
WHE000026A
1
WHE000027A
9040092C