Intended Use; Control; Pushbutton; Mobile Phone App - Webasto ThermoConnect TCon2 Operating And Installation Instructions

4

Intended use

EN
The control element ThermoConnect
TCon2 is currently approved for the follow-
ing applications:
Switching Webasto air and water heaters
on and off.
The ThermoConnect TCon2 has an integ-
rated GPS antenna and an eSIM (embed-
ded SIM).
5

Control

You can operate the air - or water heater in
3 ways:
– With the provided button.
– With the ThermoConnect app on a mo-
bile phone.
– With the "My Webasto Connect" web
page.
6

Pushbutton

Fig. 1
4
NOTE
The pushbutton must be located
within the driver's field of view and
operation. Install the pushbutton at an
accessible location, a protected area.
The pushbutton switches the air- or water
heater on or off with a default duration.
u
Press the pushbutton to start the air- or
water heater.
If necessary, the default duration can be
changed. See chapter 8 "My Webasto Con-
nect web service" on page 5.
The illumination of the pushbutton is also a
status indicator:
– LED does not light up - The heater is
switched off.
– LED flashes green – The heater is not
connected, searching for the cellular
network or restart in progress.
– LED lights up green - Heater is on.
Use of the pushbutton to restart and reset
the ThermoConnect TCon2 receiver.
– Restart see chapter 6.1 "Restart" on
page 4.
WHE000015A
– Reset see chapter 6.2 "Settings reset"
on page 4.
6.1 Restart
u Press and hold the pushbutton for 10 s.
u Release the pushbutton.
– The ThermoConnect TCon2 restarts.
– The pushbutton illumination flashes
while the ThermoConnect TCon2 is re-
starting.
6.2 Settings reset
NOTE
Settings reset performs the following
functions:
Connection settings revert back to de-
fault. Removes paired mobile users and
user phone numbers. Removes all
timers and location-based events.
Procedure for resetting to factory settings:
u Press and hold the pushbutton for 10 s.
u Release the pushbutton.
u Press the pushbutton 3 times while the
pushbutton LED is flashing.
7

Mobile phone app

The ThermoConnect TCon2 is controlled by
the ThermoConnect mobile app. It is oper-
ated using any compatible mobile phone
that is connected to the internet.
NOTE
To install the app: See chapter 13.1
"Install the app on mobile phone" on
page 8.
9040092C