Network Menu
Community Name
Network > Network Configuration > Notifications > Community Name
s
Enter the SNMP community name up to 32 alphanumeric characters long.
(Do not use spaces and any symbols other than @.)
PJLink Notification
Network > Network Configuration > Notifications > PJLink
s
Notification
Set to On to enable the PJLink notification function when the PJLink setting
is enabled.
Notified IP Address
Network > Network Configuration > Notifications > Notified IP
s
Address
Enter the IP address to receive the projector's operating status when the
PJLink notification function is enabled. Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Command Communication
Network > Network Configuration > Others > Command
s
Communication
You can select the authentication method for command communication.
Protected
Select when performing a digest authentication using Web Control
Password. You need to install the latest version of the Epson Projector
Management software.
Compatible
Select when performing plain text authentication using the Monitor
Password (up to 16 alphanumeric characters long).
Select Compatible when monitoring projectors with a switcher and a
system controller or using Epson Projector Management ver.5.30 or
earlier.
a
Secure HTTP
Network > Network Configuration > Others > Secure HTTP
s
To strengthen security, communication between the projector and computer
in Web control is encrypted. When setting security with Web control, it is
recommended to set this to On.
Web Server Certificate
Network > Network Configuration > Others > Web Server Certificate
s
Imports the Web server certificate for secure HTTP.
Web API Settings
Network > Network Configuration > Others > Web API Settings
s
You can select the Web API settings when using Web API communications.
Web API
Set to On to enable the Web API function.
114