Alarm Inhibition Time - Seneca Z-GPRS2 User Manual

18.5.
An inhibition time on the next alarm can be set. Unlike the previous filter, the alarm is
immediately active but ignored during the alarm inhibition time. This time is reset after each
alarm.
CAUTION!
DO NOT EXCEED THE FOLLOWING ANALOG INPUT VALUES OR THE INPUT STAGE COULD BREAK
AND VOID THE WARRANTY:
INPUT VOLTAGE: MAX VOLTAGE 35V
INPUT CURRENT: MAX VOLTAGE AT 12V HEADS (CURRENT PROTECTED)
USER MANUAL – Z-GPRS2 / Z-LOGGER

Alarm inhibition time

ALARM
ALARM
inhibition inhibition
T T
ALARM ON MAXIMUM
T filter
alarm
ALARM ON MAXIMUM RESET
60
T filter
alarm
ALARM
inhibition
T