Seneca Z-UMTS Installation Manual

INSTALLATION MANUAL
Z-UMTS
Datalogger HSPA + with built-in I/O, telecontrol functions,
embedded UPS and advanced programming language
EN
EN
Headquarters: Via Austria, 26 – 35127 – PADOVA – ITALY
Phone +39.049.8705355 - 8705359 - Fax +39.049.8706287
Manuals and configuration software are available at website:
This document is property of SENECA rl. Duplication and reproduction are forbidden, if not authorized. S
Contents of the present documentation refers to products and technologies described in it.
This informations may be modified or integrated for technical and / or commercial requirements.
MI004530-E ENGLISH LANGUAGE INSTRUCTIONS
MODULE LAYOUT
35 mm
13 1415 1 2 3
16 17 18 4 5 6
SENECA
S
DO1 DI1 PWR/
STS
SD/
DO2 DI2
STS
485 ETH
DI3
ACT LNK
ETH
DI4
TRF
ANTENNA
Z-UMTS
19 2021 USB
micro
22 23 24 10 11 12
Dimensions (L×H×W) 35 x 100 x 111 mm (with terminals).
Weight 250 g.
Case Material PA6, black color.
LED SIGNALING ON FRONT PANEL
LED Status LED's meaning
ON Digital output 1, relay energized
DO1
(Red)
OFF Digital output 1, relay de-energized
ON Digital output , relay energized
DO2
(Red)
OFF Digital output , relay de-energized
Slow Blinking nnnnnnnnnnnnnnoo
2.8s ON n 0.4s OFF o RS485 activity or RS232 activity
485 ACT
OFFo RS485 or RS232 serial interface not used
(Green)
Fast Blinking nononononononono
0.2s ON n 0.2s OFF o RS485 or RS232 communication Timeout
nnnnnnnnnnnnnnnnnnnn
ON n
HSDPA / HSUPA / HSPA+ / DC-HSPA Mode
Blinking nnnnnnnnnnnnnnnnnnno
WCDMA Mode
1.9s ON n 0.1s OFF o
GSM
nnnnnnnnnnnnnnnnnono
Blinking
(Yellow)
GSM / GPRS / EDGE Mode
1.7s ON n 0.3s ono
Fast Blinking nononononononononono
0.1s ON n 0.1s OFF o N
OFFo Modem OFF
t
SENECA s.r.l.
www.seneca.it/products/z-umts
100 mm
19 20 21
22 2324 10
2
2
etwork Searching or Missing Signal
MI004530-E
LED SIGNALING ON FRONT PANEL
LED
DI1
(Red)
DI2
(Red)
DI3
(Red)
DI4
(Red)
PWR/STS
(Green)
SD/STS
(Red)
ETH LNK
(Green)
ETH TRF
(Yellow)
t
ENGLISH - 1/8
TECHNICAL SPECIFICATIONS
STANDARDS
1112
INSULATION
ENVIRONMENTAL
CONDITIONS
Temperature
Humidity
Storage temperature
Protection rating
MOUNTING
INTERNAL UPS
CONNECTIONS
POWERSUPPLY
Voltage
Power absorbed
DIGITAL INPUTS
TOTALIZERS
COUNTERS
DIGITAL OUTPUTS
ANALOG INPUTS
COMMUNICATION
PORTS
t
ENGLISH - 2/8
Status LED's meaning
ON (NPN) Digital Input 1: Energized (
ON (PNP) Digital Input 1: Energized (
OFF Digital Input 1: De-energized (open contact)
ON (NPN) Digital Input : Energized ( 2
ON (PNP) Digital Input : Energized ( 2
OFF Digital Input : De-energized (open contact) 2
ON (NPN) Digital Input : Energized ( 3
ON (PNP) Digital Input : Energized ( 3
OFF Digital Input : De-energized (open contact) 3
ON (NPN) Digital Input : Energized ( 4
ON (PNP) Digital Input : Energized ( 4
OFF Digital Input : De-energized (open contact) 4
ON n Z-UMTS ON inactive log (status=ready)
Slow Blinking
nnnnnnnnnnnnnnoo
Z-UMTS active log (status=normal)
2.8 sec ON 0.4 sec OFF
Slow Blinking nnnnnnnnoooooooo
Battery powered inactive log (status=battery backup)
1.6 sec ON 1.6 sec OFF
Medium Blinking
nnnnoooonnnnoooo
Low battery warning
0.8 sec ON 0.8 sec OFF
Fast Blinking
nononononononono
Z-UMTS initializing or shutdown
0.2 sec ON 0.2 sec OFF
Fast Blinking
nonooooononooooo
Error, please refer to the diagnostic
0.6 sec 1 sec OFF
non
OFF Z-UMTS OFF
o
ON n SD card mounted in the right way
Medium Blinking
nnnnoooonnnnoooo
SD card activity
0.8 sec ON 0.8 sec OFF
Fast Blinking
nononononononono
SD card error
0.2 sec ON 0.2 sec OFF
OFF SD card not present
o
Blinking RJ45 connection activated
Blinking Traffic on Ethernet port
MI004530-E
EN61000-6-4 Electromagnetic emission, industrial environment.
EN61000-6-2 Electromagnetic immunity, industrial environment.
EN301 511 Harmonized standard for mobile stations
EN301 489-1 ElectroMagnetic Compatibility for radio equipment
EN301 489-7 Specific (EMC) conditions for mobile radio equipment
EN60950 Safety of information Technology Equipment.
IDC10
10 11 12
RS485 ANT.
13
RS232
...
19
18 RELAIS
INPUTS ...
DIGITAL
4
OUTPUTS
24
5
6
POWER SUPPLY
2 3
-10 + 50°C / (-10 + 40°C with internal UPS use). – –
30% – 90% no condens t ing.
-20 + 65°C / (-20 + 45°C < 6 – –
IP20.
35mm IEC EN60715 DIN Rail.
Backup rechargeable batteries
Removable three pole screw terminal pitch 5mm, for cable up to 2.5 mm ,
rear IDC10, front RJ45, Micro USB and Antenna SMA.
11 – 40 V or 19 – 28 V ~ 50
~
< 6.5W.
Number of channels 4. PNP or NPN configurable.
Input voltage OFF<4V ON>8V (Max. 24V ). Input current 20mA.
Max. frequency 30Hz. Absorbed Current 3mA at 12V 10mA at 24V .
32 bit totalizers 4x on non-volatile memory.
32 bit resettable counters 4x on non-volatile memory.
Number of channels 2.
SPDT Relays with free contacts.
A
Max. Voltage 250V . Max. Current 2A.
Number of channels 2. mA
Voltage input 0 – 30V. accuracy 0.1% of the Full Scale.
Current input 0 20mA – accuracy 0.1% of the Full Scale.
Inputs protection 40V / 25mA. Resolution 16 bit.
Rear RS485 COM1 port. RS485 or RS232 M10-M11-M12 COM2 screw
terminals port. Ethernet 10/100 baseT RJ45 frontal port with autoswitch.
MicroUSB side port.
MI004530-E
GND closed contact )
+12V closed contact )
GND closed contact )
+12V closed contact )
GND closed contact )
+12V closed contact )
GND closed contact )
+12V closed contact )
ENGLISH - 3/8
.
.
.
3000 VA
1500 VA
months with internal UPS use).
. Duration: up to 1 hour.
– 60 Hz .
C
C C
C C
or V configurable.
ENGLISH - 4/8
2