Secure the bottom of the duct with 2 - 4 x 8 mm screws.
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the
The hood controls are located on the front side of the canopy.
A. Duct cover holes
B. Duct cover
C. Control panel
D. Glass canopy
E. Grease filter
F. Lamp cover
G. Incandescent lamp (position and number of lamps may vary)
H. Grease filter release handle
RANGE HOOD USE
1. For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter. See the "Range Hood
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light. See
the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
Range Hood Controls
A. On/Off light button
B. Blower Off button
C. Blower speed minimum button
D. Blower speed medium button
E. Blower speed maximum button
Operating the light
The On/Off light button controls both lights. Press once for On
and again for Off.
Operating the blower
The Blower Speed buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed can
be changed anytime during fan operation by pressing the desired
Blower Speed button.
The Blower Off button turns the blower Off.