Safety - Kenwood CookEasy+ CCL50 Instructions Manual

Safety

Read these instructions carefully and retain for
future reference.
Remove all packaging and any labels.
If the cord is damaged it must, for safety reasons,
be replaced by KENWOOD or an authorised
KENWOOD repairer.
For correct operation ensure that the bowl base is
clean and dry before fitting to the power unit.
Always switch off and unplug before:
assembling or disassembling;
when not in use;
before cleaning.
Always remove the stir tool and whisk before
pouring content from the bowl to avoid burning
from splashing hot ingredients.
Be careful if hot liquid is poured into the appliance
as it can be ejected out of the appliance due to
sudden steaming.
The knife blade has been designed to be retained
on the drive shaft. The knife blade is sharp, handle
with care.
Keep utensils out of the bowl whilst connected
to the power supply unless the slow cook plug is
fitted.
Keep hands out of the bowl whilst connected to the
power supply.
When leaving the appliance unattended in the
cooking mode pay close attention to the following:
ensure the instructions are followed with regards
to temperatures and maximum quantities to
process;
make sure the unit and cord are positioned out of
reach of children and away from the edge of the
work surface;
check the progress on a regular basis to
ensure enough liquid is added and food is not
overcooking.
3