Installing Sfp Gbic And Cwdm Sfp Gbic Modules; Supported Sfp Gbic And Cwdm Sfp Gbic Modules - Nortel 1800 Installing

Chapter 4
Installing SFP GBIC and CWDM SFP GBIC
modules
The Nortel* Metro Ethernet Services Unit 1800-24T provides two bays that
accept SFP GBIC and CWDM SFP GBIC fiber optic modules. These modules,
which operate at 1000 Mbps in full-duplex mode, allow Gigabit Ethernet ports to
connect to fiber optic networks.
This chapter includes the following topics:
Topic

Supported SFP GBIC and CWDM SFP GBIC modules

Inserting and removing SFP GBIC and CWDM SFP GBIC modules
Inserting and removing an SFP GBIC fiber optic cable
Supported SFP GBIC and CWDM SFP GBIC modules
The following sections describe the supported SFP GBIC and CWDM SFP GBIC
modules.
Caution: The Metro ESU 1800-24T-DC was tested with a selection of
SFP modules. The Regulatory Certifications are valid only under the
condition of using SFP modules that have been approved for this system.
While by their design other SFP modules work, it cannot be guaranteed
they meet all the regulatory requirements when installed in the Metro
ESU 1800-24T (AC power supply) or ESU 1800-24T (DC power supply).
Installing the Metro Ethernet Services Unit 1800
39
Page
39
42
42