Nortel 1800 Installing page 16

16
•
This manual describes how to install the Metro Ethernet Services Unit 1800.
Throughout this manual, the Metro Ethernet Services Unit 1800 is also referred to
as the Metro ESU 1800, the 1800 unit, or the unit.
For conceptual information on the Metro Ethernet Services Unit 1800, see the
Metro Ethernet Services Unit 1800 Concepts.
For instructions on connecting a terminal, setting the unit IP address, and logging
on to the system, see Getting Started with the Metro Ethernet Services Unit 1800.
For instructions on configuring the Metro ESU 1800 with the CLI, see:
•
•
For instructions on configuring the Metro ESU 1800 with Device Manager, see:
•
•
Before you begin
This guide is intended for qualified service personnel with the following
background:
•
•
•
•
317808-D
1800-24T-DC includes 24 10BASE-T/100BASE-TX (UTP) Fast Ethernet
ports and 2 Gigabit Ethernet (GE) trunk ports with two Small Form Factor
Pluggable (SFP) Gigabit Interface Converters (GBICs). This model includes a
single -48V DC power supply.
Configuring Ethernet VPN and IP VLAN Services using CLI
Configuring Layer 2 Switch Mode using CLI
Configuring Ethernet VPN and IP VLAN Services using Device Manager
Configuring Layer 2 Switch Mode using Device Manager
Basic knowledge of networks and Ethernet bridging
Familiarity with networking concepts and terminology
Basic knowledge of network topologies
Experience with windowing systems or graphical user interfaces (GUI)