Volkswagen Passat 2011 Workshop Manual page 106

Passat 2011 ➤ , Passat Variant 2011 ➤
Communication - Edition 07.2019
– Drill holes -1 to 4-. Drill additional holes as required.
– Cut out remaining material using workshop means.
– Unclip old screw backplate from old dash panel and insert in
new one -arrows-.
– Turn dash panel over and deburr edges -arrow-.
Note
When screwing together parts, ensure that cradle support is cor‐
rectly aligned. It may be necessary to realign the screw holes.
– Tighten bolts alternately -arrows-.
– Feed wiring harness -1- though opening and unclip mounting.
102
Rep. gr.91 - Communication