Volkswagen Passat 2011 Workshop Manual page 120

Passat 2011 ➤ , Passat Variant 2011 ➤
Communication - Edition 07.2019
6.6.3 Renewing video cable connector strip
– Separate old 54-pin connector from reversing camera system
control unit - J772- .
– Open old 54-pin connector and remove video cable.
– Open new 54-pin connector and remove video cable connec‐
tor strip.
– Insert new video cable connector strip in old connector, and
assemble connector housing.
– Connect connector to reversing camera system control unit -
J772- .
– Coil excess length of cable and secure to main wiring harness.
– Shorten defective video cable and wrap it in main wiring har‐
ness.
– Perform functional check.
– Read event memory, and clear it.
116
Rep. gr.91 - Communication