Table of Contents
Advertisement
9102S
User's Guide
Front Panel
Always leave enough clearance in front of the calibrator to allow for safe and easy
installation and removal of probes.
Strap - A strap is provided to aid the user in carrying the Product in one hand. Slide your hand into
position and secure using the loop and hook fastener for a tight fit. Be careful when you carry the
Product while using the strap as inserts can fall out of the wells when tipped forward. Inspect the strap
periodically for wear.
Well Block - Located on the middle of the front panel are the well openings where probes may be
inserted into the well. The block accepts temperature sensors up to 12.7 mm (1/2 in) in diameter. The
wells can be made to accept probes of smaller than 12.7 mm (1/2 in) diameter by using optional
inserts. Probes should fit snugly into the wells for best results.
Display - The digital display not only shows set and actual temperatures but also indicates various
Product functions, settings, and constants. The display shows temperatures in units according to the
selected scale °C or °F.
W
Caution
Figure 3. Front Panel
8
Advertisement
Table of Contents
