Mircom TX3-BBCX-4W Assembly page 6

TX3-BBCX-4W Assembly
9
CONNECT THE BATTERIES
There are two battery shelves.
1. Connect the two upper control boards to the batteries
on the top shelf with the longer cables.
2. Connect the two lower control boards to the batteries
on the lower shelf with the shorter cables.
3. Connect the battery cables to the BAT + (red) and BAT -
(black) terminals on the control boards.
Optional 12 V
battery
red
P5 + P6 -
On/Off Switch
Figure 6: Battery connections on the board
Documentation is subject to change without notice. See
http://www.mircom.com/tx3 for the latest version of this document.
Mircom technical support: 1-888-647-2665
Upper cards
black
Lower cards
Figure 7: Connecting the card access controllers to the batteries
Longer cables to upper
battery shelf
Shorter cables to lower
battery shelf
LT-1182 rev 1.2 Page 6 of 6