10.3.1 Clearing the Counter After Replacing the Rollers
After replacing the rollers, clear After Replace Roller Counter to zero (0) from User Utility. For details, refer
to the User Utility help.
For KV-S5078Y, After Replace Roller Counter can be set to zero (0) from the operation panel (page 28) as
follows.
1.
Press the menu button (
2.
Use
or
of the cursor button to select "Counter".
3.
Press the OK button to complete your selection.
4.
Use
or
of the cursor button to select "Clear Replace Roller Counter".
5.
Press the OK button to complete your selection.
).
10.3.1 Clearing the Counter After Replacing the Rollers
109