Connecting Additional Equipment - Dantherm HCC 260 P1 Service Manual

Installation : Connecting additional equipment

Connecting additional equipment

Connecting additional equipment is to be carried out by qualified personnel only. Always
Warning
WARNING
disconnect the power by removing the 230V plug from the socket, before opening the unit !
Caution
Access to The integrated controller has various options to connect additional external equipment. To
connections gain access to the controller, please open the print cover (A) of the unit, by turning it all the
way around as shown in fig. 22 .
External
This illustration shows the various connections:
connections options
Connection Description
1: ETHERNET
2: MODBUS
3: ANTENNA Wireless connection point for proprietary remote control.
4: DIG IN
A
2
1
LAN connection for connecting to wireless router for BMS and smart phone
app. functionality.
Modbus connection for hardware accessory modul (HAC or HCP 10)
External digital input, to select specific operations. Parameters can be set in
the PC Tool.
Fig. 22
3 4
Fig. 23
21