Product Description; Overall Description - Dantherm HCC 260 P1 Service Manual

Overall description

Introduction
Product illustration
Part description
6

Product description

HCC 260/360 residential ventilation unit is designed to supply fresh air to residential home, by
exchanging heat from outgoing air to incoming air, resulting in low heat energy loss.
These units are designed for installation underneath a ceiling, in dry surroundings, with tem-
peratures >12°C. e.g. utility room or similar heated rooms.
The duct connections can be electronically swapped, providing ability to route the connected
ducts, either to the right or to the left, as described on page 15
This illustrates the unit, without the steel drip tray:
1
7
8
9
13
This table shows the parts according above illustration:
Pos Mode A(default)
1 Extract filter ISO Coarse
2
3
4
5
6 Supply filter ISO Coarse or ePM1
7 Extract air - T3
8
9 Supply air - T2
10 Outside air - T1
11 Water drainage spigot
12 Exhaust air – T4
13
14
15
3
2
4
14
Fig. 1
Bypass module
USB connection
Filter reset button
Controller PCB (external connections see page 21)
Blocked
Supply fan
Heat exchanger
Extract fan
Product description: Overall description
5
6
15
Mode B
Supply filter ISO Coarse or ePM1
Extract filter ISO Coarse
Outside air - T1
Water drainage spigot
Exhaust air-T4
Extract air - T3
Blocked
Supply air - T2
Extract fan
Supply fan
10
11
12