Wiznet WizFi210 Connection And Settings Manual page 9

5. Data Communication Test
(1) <ATA> command returns "OK".
(2) Connect <WizFi210> to the TCP Client program of <PC 1>.
<PC2> Serial Terminal Program
(3) Input characters at the <PC 1> and send them to the network.
(4) Input characters at the <PC 2> and send them to the serial.
Input characters. This data is from <PC 2>.
(5) Close the connection with WizFi210 by finishing the TCP Client program of <PC 1>.
WizFi210 Quick Start Guide
(WIZnet Co., Ltd.)
<PC1> TCP Client Program
Input characters. This data is from <PC 1>.
8