Printing Only White Data - Roland SC-545EXW Manual

1-2 Printing on Transparent Media

Printing Only White Data

1.
Prepare the printer.
❶
Press the [MENU] key and make the "EDGE DETECTION" item to "DISABLE".
❷
Load transparent media into the printer.
G When the media you are loading into the printer warps or partially floats from the platen, load it into the
printer so that its front end goes about 20 cm (8 in.) from the starting edge of the print area.
G Be sure to use the media clamps when you load media.
2.
Prepare the image files for printing.
Draw an image using application software such as Adobe Illustrator, and then save the image as a PS file.
Important!
G
Make sure that you set the color of any objects in the image between K0% and K100% in the CMYK mode.
G
The above rule also applies when you want to use gradient colors.
3.
Start up Roland VersaWorks on your computer.
Check the printer model and status in the main window.
4.
Make necessary settings for printing the image to queue folder B.
❶
Double-click
❷
In the [Queue B Properties] dialog box that appears, make the following settings.
Make sure that all the settings for the setup items other than listed below are left as their initial defaults.
Icon
Quality
Printer Controls
* It is recommended that you use the optional media drier. The dry time setting here (15 minutes) applies when
you use the media drier.
❸
Click OK to close the [Queue B Properties] dialog box.
16
.
Setup item
Media Type
Mode
Use Custom Settings
Dry Time*
Setting
"Clear PET Film" or "PET Clear Film, Adhesive"
White (v) W-PASS
On
15 Minutes