Lucent Technologies PARTNER MAIL Installation And Use Manual page 71

PARTNER MAIL - Initial Programming
Programming the Fax Extension
Assign the Fax extension, or the Fax Hunt Group, where the Automated Attendant
Service transfers fax calls.
Use Form 2: System Parameters to identify the fax extension or Fax Hunt
Group.
When you program the system to transfer fax messages, the Touch-Tone
Gate is set ON automatically. This enables the system to immediately detect
fax transmissions and send them to a fax machine.
1. Access the Administration Main Menu as described in an earlier section.
The system plays the system programming options.
Press [ 1 ] to program System Parameters.
2.
3. Press [ 4 ] to program the fax extension.
4. Enter the Fax extension or Fax Hunt Group extension followed by [ # ]. The
system confirms the new fax extension and plays,
The touch-tone gate is on.
Press [
5.
4-12
Programming System Parameters
NOTE:
To deactivate fax call handling, enter [ 0 ] as the fax extension, then
press [ # ].
] [ # ] to return to the System Administration Menu.